| Mute |
Muting and | The mute button provides an easy way to |
also be performed with the | temporarily turn the volume of the |
remote control. | The current volume control setting is retained in |
| memory and appears on the display. |
| Tape Output |
The “Tape Output” function | When the “Tape Output” button is pressed, the |
does not operate on the “Moon” | indicator will light up and the signal from the |
input. This avoids the | currently selected source component will be routed |
undesired possibility of | to the “Tape Out” connectors. This allows a |
creating a feedback loop. | recording to be made. |
| Turn the “Tape Output” off, unless a recording is |
| being made. This will completely disconnect the |
| recorder from the |
| connection), avoiding the possibility of undesired |
| ground loops. |
| Display |
The display function is only | The display of the |
available from the remote | remote control, if desired. A single blue light |
control. | indicates that the display is turned off. When |
| further commands are received, either from the |
|
|
| display will be activated for a few seconds to confirm |
| the command, and then turn off automatically. |
| Pressing the “Display” button on the remote control |
| again will turn the display on. |
8