Ayre Acoustics K-5x owner manual Input Source Selection

A y r e

K-5x

low setting. After that, the current volume setting is retained in memory, and will remain constant when changing inputs.

Input Source Selection

The source component may also The input selector buttons are located below the

be selected with the remote display. Icons that match the connector labels on the

control. rear panel (Star, Planet, Comet, Moon) are used to denote the inputs. When the unit is first connected to an AC power source, the “Star” input is selected by default.

The input selector utilizes sophisticated FET switches. Both the signal and ground connections to each source component are switched, so that any un-selected components are completely disconnected from the system. This avoids any problems with undesired ground loops.

7