Ayre Acoustics Power Amplifier owner manual Operation, Controls and, Power Switches

Controls and

Operation

The Ayre V-6xe has a front panel control for normal stand-alone operation. The amplifier may also be controlled via a “trigger” input in a home-theater.

Power Switches

The master power switch on There are two power switches on the Ayre V-6xe.

the rear panel also The master power switch on the rear panel is

incorporates a circuit breaker normally intended to be left on at all times. The

that acts as a resettable fuse. front-panel switch selects between the “Standby” and “Operate” modes.

When the master power switch is first turned on, the front panel indicator light will glow red for approximately one second. During this time, the unit is in “Warm-Up” mode and the front-panel switch is inoperable.

Red = Warm-UpAfter the circuitry has stabilized, the indicator light

Green = Standby will change to green, indicating that the unit is in

Blue = Operate “Standby” mode and is ready for operation. When the listener presses the front-panel switch, the unit is in “Operate” mode and the indicator light glows blue.

6