Installation and
Operation
| The Ayre |
| guidelines will ensure that the installation goes smoothly. |
| Location |
Do not stack the Ayre | The Ayre |
directly with other components, | operation. |
as this may restrict the air | ! |
|
flow or induce hum into the | It is important to maintain an adequate supply | |
audio circuitry. | of air flow to avoid overheating the amplifier . |
Good locations for your amplifier are on the floor, or in an
The receiver for the infrared remote control is mounted behind the bottom recess on the amplifier’s front panel. Although the transmitter’s beam will reflect off of most wall surfaces, a direct line of sight from the listening position will ensure the maximum range. The beam will also travel through glass if necessary.
Page 3