Ayre Acoustics V-1x owner manual Trouble, In Case of

In Case of

Trouble

Is the unit in the “Operate” mode?

Are all of the connections to the amplifier secure?

Is the AC circuit breaker OK?

Should the Ayre V-1x amplifier ever fail to operate, please check the following:

The rear switch is the master power switch, and is normally intended to be left on. The front switch is the Standby/Operate switch. To operate the amplifier, the front panel indicator must be glowing blue.

Check to see that the input and speaker connections on the rear of the V-1x are in place. Also, be sure that the amplifier is connected to a working AC outlet.

The power switch on the rear of the unit incorporates an AC circuit breaker. In the case of an overload, the circuit breaker automatically sets the switch to the “off” position. To reset it, press the switch to the “on” position.

If the circuit breaker immediately resets itself to the “off” position, do not attempt further repairs. There are no user-serviceable parts in the Ayre V-1x. If the amplifier still does not operate, bring the unit to your dealer for assistance.

!Do not remove the amplifier cover. Hazardous voltages may exist inside the unit.

Page 7