Rail Fuses

Indicator LEDs on the rear of Internal fuses on the power supply rails of each

the unit will glow red when channel protect the loudspeakers from excessive

one of the fuses blows. Please current, as well as the amplifier from short-circuits.

refer fuse replacement to a If one of these rail fuses blows, that channel will fail

qualified service technician. to operate, although the front panel LED will typically continue to glow blue.

Do not remove the amplifier cover. Hazardous voltages may exist inside the unit.

Use of rail fuses other than a 5 x 20 mm fast-acting 10 ampere unit may damage the unit and void the warranty.

AC Line Voltage

If the AC line voltage drops below 80% of normal (brown-out), the unit will revert to the red “Warm-Up” mode with the outputs muted. After the voltage returns to normal, the initial warm-up cycle will begin again and the unit will then revert to the green “Standby” mode. Press the front panel button to return the unit to the blue “Operate” mode.

DC Offset

The Ayre V-6x incorporates a circuit to detect the presence of DC at the output terminals. In this situation, the amplifier reverts to the red

11

Page 12 Page 14
Page 13
Image 13
Ayre Acoustics V-6x owner manual Rail Fuses, AC Line Voltage, DC Offset
Page 12 Page 14

V-6x specifications

Ayre Acoustics V-6x is a high-performance, two-channel power amplifier that exemplifies the company’s commitment to delivering pristine audio quality. Designed for discerning audiophiles, the V-6x integrates innovative technologies and meticulous engineering to create a captivating listening experience.

One of the standout features of the V-6x is its innovative "Zero Feedback" design. This architecture eliminates the use of negative feedback, allowing for a more natural and uncolored sound reproduction. With less distortion and a more accurate representation of the source material, the V-6x delivers a soundstage that is both wide and deep, providing an immersive audio experience.

The amplifier boasts a powerful dual-mono design, which means that each channel has its own dedicated power supply and amplification stage. This configuration not only enhances channel separation but also contributes to the amp's robust power output. The V-6x delivers a remarkable 200 watts per channel into 8 ohms, ensuring that it can drive a wide variety of loudspeakers with ease. Despite its power, the amplifier maintains a graceful and refined character, making it suitable for any genre of music.

Another noteworthy characteristic of the V-6x is its high-quality components. The amplifier utilizes custom-designed, high-performance output transistors for superior reliability and sound quality. These transistors are paired with a proprietary Class A/B operation, which balances efficiency and warmth, creating a rich tonal palette.

The V-6x also features Ayre's renowned "AyreLock" technology, which ensures a stable, low-noise power supply that is impervious to fluctuations. This results in a clean power delivery that enhances overall system performance and reduces the potential for interference and distortion.

In terms of build quality, the V-6x showcases Ayre Acoustics' dedication to craftsmanship. Its sleek, minimalist design is not only aesthetically pleasing but also functional, allowing for optimal airflow and heat dissipation. As a result, the amplifier operates reliably even during extended listening sessions, ensuring longevity and consistent performance.

In summary, the Ayre Acoustics V-6x power amplifier is a remarkable piece of audio technology that stands out for its Zero Feedback design, dual-mono architecture, high-quality components, and exceptional build quality. Ideal for serious music lovers seeking an amplifier that delivers both power and fidelity, the V-6x promises to elevate any audio system to new heights.
Top Page Image Contents