Ayre Acoustics V-6x owner manual Loudspeaker Outputs

V-6 Power Amplifier S.N.

¡Attention! — Balanced Outputs

Do Not Connect Output Terminals to Ground

Unbal		Unbal
Input Sel	Pass-Through	Input Sel	Pass-Through
Bal	Output	Bal	Output

Fuse + - Fuse Fuse + - Fuse

Unbal

Input Sel	Pass-Through
		Trigger In/Out
Bal	Output

Volts

50/60 Hertz

1800 W Max

Fuse + - Fuse

Fuse - + Fuse Fuse - + Fuse Fuse - + Fuse

Pass-Through	Bal		Pass-Through	Bal		Pass-Through	Bal
Output		Input Sel	Output		Input Sel	Output	Input Sel
	Unbal			Unbal			Unbal

A y r e Boulder, Colorado USA

input of another channel on the same amplifier, or of another amplifier with true balanced inputs.

The pass-through output does If you wish to drive an unbalanced amplifier from

not convert unbalanced sources the pass-through outputs, you will need to use

to a true balanced signal. XLR-to-RCA adapters. These should be configured so that pin 1 of the XLR is connected to the shell of the RCA connector, and pin 2 of the XLR is connected to the center pin of the RCA connector.

Loudspeaker Outputs

The heavy-duty output The Ayre V-6x drives the loudspeakers with

terminals of the Ayre V-6xbalanced outputs. Since none of the output

work best with speaker cables terminals are grounded, connecting any of them to

using spade lugs. ground may result in damage to the amplifier.

Do not connect the loudspeaker outputs to any speaker switch-box, accessory, or test equipment that has a common ground connection.

5