![](/images/new-backgrounds/1118332/1183325x1.webp)
Chapter 1: INTRODUCTION
The 232BRC acts as a translator between devices with incompatible asynchronous serial communications. Each port uses a dedicated UART and includes a 16 kbyte receive buffer. Each port can be independently configured for data rate, data format, and handshaking.
Each side of the 232BRC can be configured to match the connected device. It supports any data rate up to 115.2 kbps and all standard data formats. Each side can either supply or accept hardware or software handshaking. Setup parameters are configured through the PC setup software provided and saved in
The 232BRC is supplied with two DB9 connectors. The female connector is configured as a DCE for connecting to PCs, Terminals, and other DTE devices. The male connector is configured as a DTE for connecting to Modems and other DCE devices. Three LEDs indicate power and the presence of data in either port’s buffer.
Applications
•Connect devices with different data rates.
•Convert from hardware to software handshaking.
•Convert between data formats.
•Add handshaking to a streaming device.
•Use as a port buffer to increase throughput.
3 |
Specifications |
|
Model: | 232BRC |
Interface: | |
Data Bits: | 5, 6, 7, or 8 |
Parity: | Even, Odd, or None |
Data Rate: | 300 to 115.2 kbps |
Stop Bits: | 1 or 2 |
Flow Control: | Hardware(RTS/CTS), |
| Software(XON/XOFF), or None |
Buffer Memory: | 16 Kbytes SRAM per port |
LEDs: | Buffer A, Buffer B, Power |
Power Requirements: | +12 to +17 VDC @ 60mA max. |
Power Connector: | 2.5mm Phono Jack (+ Tip) |
Recommended Supply: B&B Model 232PS | |
Data Connectors: | Port A DB9 Female |
| Port B DB9 Male |
Dimensions: | 5.8 x 3.6 x 1.2 in. (14.6 x 9.1 x 3.0 cm) |
Setup Software: | PC compatible, Windows 95/98/NT/2000 |
Supplied Accessories: | (2) 3.5” Floppy Diskettes |
| Instruction Manual |
Default Parameters
When shipped, the 232BRC comes set up for the following parameters for ports A and B:
Data Rate = 9600 bps
Data Bits = 8
Stop Bits = 1
Parity = None
Handshaking = None
Refer to the following sections of the manual for what each of these parameters means and how they can be changed.
4 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph |
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445 | B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445 |