CHAPTER 4: POWER CONNECTIONS
The unit may be port-powered using DTR and RTS on the serial port. If the 232SPS2 cannot be powered using the handshake lines, it may be powered externally using +7 to +18 volts DC at 2 milliamps. If you are using an external supply, simply plug a 2.5 mm plug from an appropriate DC source into the power jack on the side of the 232SPS2 module. Power supplies are available through B&B. (Model 232PS is recommended.)
232SPS2-3903 Manual | Chapter 4: Power Connections | 7 | 8 | Chapter 4: Power Connections | 232SPS2-3903 Manual |
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350 | | | B&B Electronics -- PO Box 1040 -- | Ottawa, IL 61350 |
PH (815) 433-5100 | -- FAX (815) 433-5104 | | | PH (815) 433-5100 -- FAX (815) 433-5104 |
