B&B Electronics EIR203-3SC Quick Start Guide, Attach Fiber Optic Cable if equipped, Type

EIR203 1308qsg-2/2

© 2008 by B&B Electronics. All rights reserved.

QUICK START GUIDE

B&B ELECTRONICS

Attach Fiber Optic Cable

(if equipped)

Warning: Work Safe – Fiber Optic equipped models are Class I Laser/LED devices. To avoid causing serious damage to your eyes, DO NOT STARE DIRECTLY INTO THE LIGHT.

1.Slider Guide

2.Slider Ridges

3.Slider

1.Ensure your fiber optic cable is terminated with the correct connector type. EIR203 switches use SC or ST connectors.

2.Fiber optic type for each port is located on the product’s side label. When connecting the cable to the switch, be sure to line up the slider guide on the cable and switch connectors.

3.Connect the fiber optic transmitter to the downstream device’s receiver and vice-versa.

Fiber Optic Cable Information

Mode and Distance	Type	Wavelength
Multi-mode (2 km)	62.5/125 µm	1310 nm
Single-mode (15 km)	9/125 µm	1310 nm
Single-mode (40 km)	9/125 µm	1310 nm
Single-mode (80 km)	9/125 µm	1550 nm

	Output Power	RCVR Sensitivity
Multi-mode (2 km)	-19 to -14 dBm	≤ -32 dBm
Single-mode (15 km)	-15 to -8 dBm	≤ -32 dBm
Single-mode (40 km)	-5 to 0 dBm	≤ -34 dBm
Single-mode (80 km)	-5 to 0 dBm	≤ -34 dBm

Installation Complete

Mechanical Diagram

1.When the network cables are attached and power is applied, installation is complete.

2.The switch will automatically discover network devices, populate its MAC address table, and pass traffic to the appropriate ports.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 www.bb-elec.comorders@bb-elec.comsupport@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com