B&B ELECTRONICS
© 2004 by B&B Electronics. All rights reserved.
Quick Start Guide
5-Port Industrial 10/100
Ethernet Switch CE
Model IASW5P
Description
The IASW5P is an Industrial Ethernet switch. Switches have some advantages over hubs. For one, they remember which node is which and route the traffic accordingly. Also
This is no standard switch either, since the product is made for the unpredictable, industrial environment. It is housed in a sturdy, compact ABS enclosure with options to be either panel or DIN rail mounted.
Connections are straight forward. Each port is designed to auto negotiate for speed and connectivity. No crossover cables necessary. It will accept standard RJ45 UTP or STP cabling. Power supply is any unregulated
Diagnostic LEDs help troubleshooting and serve as a quick visual monitor. There is one red LED to indicate power. Each port has two LED’s, an orange for speed and a green for link/activity.
Connections
Standard RJ45 female connectors are provided. Standard RJ45 plug cables are all that is necessary to connect your devices to the unit since the switch supports auto crossover. External power supply is connected using the
RJ45 Pinouts
Pin | Signal |
1 | TX+ |
2 | TX- |
3 | RX+ |
4 | not used |
5 | not used |
6 | RX- |
7 | not used |
8 | not used |
LED Indicators Summary
LED | Color | On | Off | Blinking |
SPD | orange | 100 | 10 | reset/error |
LNK | green | link | no link | data |
PWR | red | power | no power | NA |
Mechanical & Power Options
LED Indicators
SPD LNK
DIN OR PANEL MOUNTABLE
SPD LNK
PWR 
Port 5/Uplink Port 4 Port 3 Port 2 Port 1
4.5in
11.4cm
| 12VDC@300MA |
| 232PS4 |
| 485PS4 |
| or |
| |
PLUGGABLE | REQUIRED |
TERMINAL | (NOT INCLUDED) |
BLOCK | |
| 12VDC@300MA |
PWR
PRODUCT INFORMATION
3.5in
8.9cm
1.3in
3.2cm
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
