![](/images/new-backgrounds/1166769/16676913x1.webp)
Connecting a USB Device
1.Install any software required to operate the USB device(s). Refer to the documentation for the device(s), as required.
2.Connect the USB device to the Device port on the Remote Unit.
3.Check that the Device LED on the Remote Unit is on.
Manual Documentation Number: | 7 |
Troubleshooting
The following table provides troubleshooting help. The topics are arranged in the order in which they should be executed in most situations. If you are unable to resolve the problem after following these instructions, please contact technical support for further assistance (see page 12).
Symptoms/Cause |
| Remedy |
|
|
|
All LEDs on Local Unit and | 1. | Ensure that the power adapter is connected to |
Remote Unit are off. |
| the Local Unit or Remote Unit |
Cause: | 2. | Check that the adapter is connected to a live |
The Ulinx Extender is not |
| source of electrical power |
receiving power from the |
|
|
adapter |
|
|
Power LED on one unit is | 1. | Ensure that a Category 5 UTP cable with |
on, power LED on other unit |
| |
is off. |
| between the Local Unit and Remote Unit. |
Cause: | 2. | Connect a short Category 5 patch cord |
There is no connection |
| between the Local Unit and Remote Unit. |
between the Local Unit and |
| Recheck the operation of the system. |
Remote Unit. |
|
|
|
|
|
Link LEDs on Local Unit | 3. | Ensure that a Category 5 UTP cable with |
and Remote Unit are off. |
| |
Cause: |
| between the Local Unit and Remote Unit. |
There is no connection | 4. | Connect a short Category 5 patch cord |
between the Local Unit and |
| between the Local Unit and Remote Unit. |
Remote Unit. |
| Recheck the operation of the system. |
|
|
|
USB Hub Power | 5. | Move the power adapter from the Local Unit to |
Exceeded message is |
| the Remote Unit. |
displayed by the computer. |
|
|
Cause: |
|
|
The USB device connected |
|
|
to the Remote Unit is a |
|
|
|
| |
power adapter is connected |
|
|
to the Local Unit |
|
|
8 | Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph