6 PEV 13 Midrange
High efficiency 6" cone midrange, ideally suited for three and four way systems. Very smooth response from 400 Hz to 8 kHz.
An aluminium phase plug increases axial sensitivity and controls high frequency dispersion.
Speakers HPL Coaxials HF Compression drivers Horns
Specifications
Nominal Diameter | 170 mm (6.5 in.) |
Nominal Impedance | 8 Ω |
Minumum Impedance | 6 Ω |
Power Handling |
|
| |
Nominal1 | 120 W |
Continuous Program2 | 240 W |
Sensitivity (1W/1m)3 | 99 dB |
Frequency Range | |
Voice Coil Diameter | 38 mm (1.5 in) |
Winding Material | Aluminium |
Former Material | Fiber Glass |
Winding Depth | 7 mm (9/32 in) |
Magnetic Gap Depth | 6 mm (1/4 in) |
Flux Density | 1.4 T |
Thiele & Small Parameters4
Fs | 126 Hz |
Re | 5.2 Ω |
Qes | 0.39 |
Qms | 4.6 |
Qts | 0.36 |
Vas | 6 dm3 (0.21 ft3) |
Sd | 132 cm2 (20.5 in2) |
η0 | 3% |
X max | ± 0.6 mm |
X var | ± 1.5 mm |
Mms | 6 g |
Bl | 8.2 T·m |
Le | 0.6 mH |
Mounting and Shipping Information
Overall Diameter | 187 mm (7.4 in) |
Bolt Circle Diameter | 172 mm (6.7 in) |
Baffle Cutout Diameter | 145 mm (5.7 in) |
Depth | 78 mm (3.1 in) |
Flange and Gasket Thickness | 11 mm (7/16 in) |
Net Weight (1 unit) | 2.4 kg (5.3 lb) |
Shipping Weight (4 units) | 10.9 kg (24 lb) |
Shipping Box (4 units) | 405x225x210 mm |
| (15.9x8.8x8.3 in) |
12 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. Loudspeaker in free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average SPL from 200 to 8000 Hz.
4
