DE 25 Hf Compression drivers
1" high frequency compression driver. Low mass mylar diaphragm ensures an extremely flat frequency response and optimized ceramic magnet assembly, results in high sensitivity and low distortion up to 18 kHz.
Speakers HPL Coaxials HF Compression drivers Horns
Specifications1
Throat Diameter | 25 mm (1 in) |
Nominal Impedance | 8 Ω |
Minimum Impedance | 7.7 Ω |
Power Handling |
|
(2200 |
|
Nominal2 | 40 W |
Continuous Program3 | 80 W |
Sensitivity (1W/1m)4 | 108.5 dB |
Frequency Range | 1.5 – 18 kHz |
Recommended Crossover5 | 2.2 kHz |
Voice Coil Diameter | 44 mm (1.7 in) |
Winding Material | Aluminium |
Inductance | 0.11 mH |
Diaphragm Material | Mylar |
Flux Density | 1.7 T |
Also available in 16 Ω, data upon request |
|
Mounting and Shipping Information
Two M6 holes 180° on 76 mm (3 in) diameter Three M6 holes 120° on 57 mm (2.2 in) diameter
Overall Diameter | 134 mm (5.3 in) |
Depth | 60 mm (2.4 in) |
Net Weight (1 unit) | 2.8 kg (6.2 lb) |
Shipping Weight (4 units) | 12.1 kg (26.6 lb) |
Shipping Box (4 units) | 300x160x180 mm |
| (12x6.3x7.1 in) |
1Driver mounted on B&C ME 45 horn.
22 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope
