B&K AV7.1 Erasing Learned Functions

Using Your Remote

4. Press and hold the button on the original remote control that you wish to

teach into the AV7.1, for approximately three seconds. The LCD on the

AV7.1 will show - - - - - indicating that it is receiving information from

the original remote control.

5. Release the button on the original remote control. The LCD on the

AV7.1 will show RETRY.

6. Press and hold the same button on the original remote again, for

approximately three seconds. The LCD on the AV7.1 will flash GOOD,

the Device Mode and then return to LEARN, verifying that the new

function has been learned.

Repeat steps 3 through 6 for any other Device buttons you wish to teach new

functions.

7. Once you have completed the learning for all of the desired Device

buttons, store the learned functions by pressing the B&K and SEL /

PLAY buttons simultaneously, once again. The LCD in the AV7.1 will

show SAVED and then return to the B&K mode. The remote control

has now returned to the original operating mode.

Erasing Learned Functions

To erase learned functions, please refer to the following procedures:

1. Press the Device button for the mode where the learned function has

been stored.

2. Press and hold the Device and SEL / PLAY buttons simultaneously, for

approximately three seconds, until the LCD shows LEARN.

3. Press and release the button to be erased. The LCD will show READY.

4. Press the LIGHT button. The LCD will flash ERASE, CLEAR, Device

Mode, and then return to LEARN. Repeat Steps 3 and 4 for any other

buttons to be erased.

5. Return to the normal operating mode, by pressing the Device and the

SEL / PLAY buttons simultaneously.

The learned functions on the selected buttons have now been erased. The

default preprogrammed functions for these buttons will now operate on the

remote control.