Advanced Features
22
Transport Control “Punch Through”
You can set-up your remote control so that V1 or CD Transport Controls (PLAY,
STOP, FAST FORWARD, REWIND, PAUSE, and RECORD) will also operate in
other modes on the remote.
Example: Control V1 functions while
operating the remote control in the TV mode.
Note: When this feature is active, the V1 or CD functions (PLAY, STOP, FAST
FORWARD, REWIND, and RECORD) will override any existing functions pre-
assigned to these buttons in that mode.
To Set-Up
1. Select the Device Mode into which you want to program Transport
Control “Punch Through.”
2. Press the corresponding Device and MUTE buttons, simultaneously.
SET will appear in the LCD.
3. Press the SELECT / PLAY button. PUNCH will appear in the LCD.
4. Press either the V1 Device Button to set-up for V1 Transport Control
or the CD Device Button to set-up for CD Transport Control. V1 or CD
will flash in the LCD, depending on the Device Button selected.
The V1 or CD Transport Controls (PLAY, STOP, FAST FORWARD, REWIND,
PAUSE, and RECORD) will now override the original functions of the buttons
in this mode.
To Return to the Original Setting
1. Select the Device Mode that you want to turn off Transport Control
“Punch Through.”
2. Press the corresponding Device and the MUTE button, simultaneously.
SET will appear in the LCD.
3. Press the SELECT / PLAY button. PUNCH will appear in the LCD.
4. Press the Device Button again. The Device Mode will flash in the LCD.
The V1 or CD Transport Control “Punch Through” feature is now turned
off. The original functions assigned to these buttons are restored.