Display Setup
Set the intensity of the front panel’s alphanumeric display.
return to setup menu
(PRESET) and ↵ (ENTER)
MENU4
set display bright, medium, or dimVOLUME KNOB
(BAL L) or(BAL R)
3
enter display setup menu
↵ ( ENTER)
SEL or ENTER2
move to display setup
From setup menu:
∧ (TUNE +) or ∨ (TUNE -)
From setup menu:
or
1
ActionFrom Front PanelFrom Remote
Memory Options
Your Preamplifier Tuner continually saves any settings you have made even if power is lost. However, you may
wish to save a backup of your settings in case of inadvertent changes to them.
return to normal operation
(PRESET) and ↵ (ENTER)
MENU8
return to main menu
(PRESET) and ↵ (ENTER)
MENU7
return to setup menu
(PRESET) and ↵ (ENTER)
MENU6
confirm selected memory operation
note: this takes a few seconds
↵ ( ENTER)
SEL or ENTER5
activate selected memory operation
↵ ( ENTER)
SEL or ENTER4
select backup or restore memoryVOLUME KNOB
(BAL L) or(BAL R)
3
enter memory options menu
↵ ( ENTER)
SEL or ENTER2
move to memory options
From setup menu:
∧ (TUNE +) or ∨ (TUNE -)
From setup menu:
or
1
ActionFrom Front PanelFrom Remote
To res tore backup s ettings perform the sam e procedure as described above but select res tore instead of back up.
If you have never made a backup, then performing a restore will call back the original factory settings.
22 P/N 13010 REV 0005