ADVANCED SETUP FEATURES

WARNING - The following describes the advanced features of the Preamplifier Tuner. Since changing
som e of these f unctions m ay cause severe eff ects suc h as no sound or no remote c ontrol operation, we suggest
you leave this menu disabled ( hidden) for norm al operation. If you are unsure of what you are changing DO NOT
perform any advanced operations. These features may be activated by simultaneously pressing the SLEEP,
DOWN, and UP buttons on the front panel of the Preamplifier Tuner. It will be assumed the user of these
advanced features is already familiar with how to navigate and adjust parameters in the Preamplifier Tuner's
MENU system. An Advanced Setup Flow Chart has been supplied at the end of this m anual as a visual aid for the
menu’s navigation.

Note - if you have enabled the Advanced Visible option then you can return to this menu to hide the advanced

visible selection by simultaneously pressing the SLEEP, TUNE-, and TUNE+ buttons and selecting Hidden.

MISCELLANEOUS SETUP

Configuration will allow you to set a maximum volume level and change remote control ID codes for use in a
multi-zone application.
Max Lev el - m ax level allows you to set a m ax im um volum e level. T his is very useful if you are using s peak ers or
amplif iers that can’t handle the output level from your Preamplifier T uner or if you simply wish to limit the volum e
that can be achieved using normal front panel or remote operation.
Max Level may be set from -74 dB to + 8 dB (default).
WARNING - If you set this level too low, the Preamplifier Tuner may appear broken (no sound).
Product ID - Each transmitted IR message from your remote control includes a Product ID code that is used to
distinguish it f rom other devices. Product ID codes allow multiple B&K products to be controlled from the sam e IR
rem ote control. Fr om the f actory, your Pr eamplif ier Tuner is to use Produc t ID code 2. T here are 16 valid Pr oduct
ID’s available for this product. Make sure you are in the ADVANCED SETTINGS menu.
WARNING - If you change the product ID code in the Preamplifier Tuner without having the capability to
generate this new IR code, your Preamplifier Tuner w ill no longer hav e IR control capability. If this feature
is to be implemented, we recommend our AV5.1 or AV7.1 preprogrammed & learning remote control. The
AV5.1 / AV7.1 has the capability to generate messages using these 16 product ID codes.

POWER ON TITLES

W hen you tur n your Pream plifier Tuner on it displays three lines of text on the front panel’s alphanum eric display.
You can change two of these lines of text to a personalized message.
to
to
24 P/N 13010 REV 0005