Baby Jogger manual Chicco Car Seat Adaptor, For Single Strollers

This Kit Includes:

2 Adaptor Brackets

2 U-Shaped Support Bars

2 Bar Fasteners

Chicco Car Seat Adaptor

For Single Strollers

The Chicco Car Seat Adaptor is designed to be used with the mounting brackets on your Baby Jogger City Mini, City Classic, City Elite, Summit XC, Summit 360, or F.I.T stroller and your Chicco Car Seat. This Car Seat Adaptor is only compatible with this car seat and stroller models.

1Remove canopy and seat fabric from frame.

2Insert Adaptor Brackets into the corresponding mounting brackets on your stroller until they click into place.

NOTE: The right and left mounting brackets on your stroller are determined by standing in front of and facing the stroller.

3Insert U-Shaped Support Bar (labeled HEAD) into the front holes on the Adaptor Brackets.

Adaptor Brackets

U-Shaped

Support Bars

Bar Fasteners

45

67

4Insert U-Shaped Support Bar (labeled FOOT) into HEAD Support Bar.

5Screw Bar Fasteners into holes on the top of the U-Shaped Supports.

6Close compression locks by flipping the red latches down.

7Secure your car seat onto the stroller using the safety belt on the Car Seat Adaptor Brackets.

NOTE: Always close compression locks

and securely fasten the Bracket Adaptor safety

belt over the car seat before operation.

The sample product shown on this manual may differ slightly from your production quality Car Seat Adaptor.

However, this will not affect the assembly or functionality of your Baby Jogger product.

8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com