Baby Jogger Double Jogging manual Brakes, Hand Brake with Parking Button, Adjusting the Brake

Performance Double (Assem) 12/16/04 4:08 PM Page 8

Brakes

Hand Brake with

Parking Button

•To use the parking button feature, simply squeeze the brake handle and push the park brake button.

JOGGER IS PACKAGED

WITH THE HAND BRAKE

ASSEMBLY LOOSE.

TIGHTENING IS NECESSARY

FOR SAFE OPERATION!

Adjusting the Brake

Parking

Button

Cylinder	Small Ring
Ring

NOTE: Some Joggers are shipped with the Canopy, Seat and Basket pre-assembled. Assembly

Seatinstructions are given if any pre-assemble items are removed for cleaning or replacement.

•Rotate hand brake assembly upward to a comfortable position then tighten bolt (clockwise) on the hand brake assembly with supplied allen wrench as shown.

Rear Wheel

Parking

Brakes

•Simply push brake pedal down to

engage brake and
lift up to release.	Brake Pedal

•If you don’t have good braking action, simply squeeze the brake handle five or six times. If the problem persists, loosen the brake’s cylinder ring to adjust the small ring, and then move the small ring away from the handle to tighten the cable. (Please do not over tighten!) To lock the rings, tighten the cylinder ring against the handle while holding the small ring in place.

1 Snap seat to frame.	2 Attach bottom part of seat	3 Wrap bottom straps around
	to footplate with the velcro.	frame, thread strap through
		D-ring and secure.

4 Snap center anchor strap.	5 Attach seat anchor straps
	to rear frame uprights.

8 9