To Assemble Your Bassinet, Assembly

TO ASSEMBLE YOUR BASSINET

NOTE: Playard MUST be in a locked set-up position before installing and using the bassinet feature.

1 Nylon bassinet insert

4 Metal support tubes 2 (male) (2 female)

1.Insert the 2 female tubes into the two male tubes. (Fig. 2)

2.Insert the 2 assembled tubes through the loops provided on the bassinet insert. (Fig. 3).

3.Place assembled bassinet onto the Playard. Push down each of the bassinet supports onto the playard frame as shown in (Fig. 4).

NOTE: The printed warning label should be facing toward the inside of the bassinet so that it is readable.

4.Place the Playard mattress into the bassinet with the padded side facing up (Fig. 5).

5.Connect the canopy to the Playard frame as shown in (Fig. 6)

PLEASE NOTE THE CANOPY IS INTENDED FOR INDOOR USE ONLY.

Figure 1

Figure 2

Figure 3.

Figure 6.

Figure 5.

Figure 4.