Baby Trend CSO190AD809 manual Baby Trend at 1-800-328-7363 for assistance

7.0INSTALLATION

place. Check that there is no slack in the webbing on both sides of the base and that the base is tightly installed. Fig. 45-2 and 45-3.

6.Check that nothing is on top of the base or anything that will interfere with the proper latching of the Safety Seat to the Base. Place the Safety Seat onto the Base and push down until the Safety Seat latches securely to the Base and you hear a click. Pull upward on the Safety Seat to check that the Safety Seat is securely latched onto the base. (Fig. 25-1)

If the Safety Seat does not securely latch onto the Base, the Safety Seat will provide No Protection for your child. DO NOT use the Safety Seat with the Base if it does not securely latch onto the Base. Please call

Baby Trend at 1-800-328-7363 for assistance.

7.To remove the base from the vehicle, squeeze the webbing release button on the LATCH connector to loosen the webbing. (Fig. 46-1a) Please note that the LATCH connector can not be released from the LATCH anchor if the webbing is tight. Press the LATCH hook release button on each connector to release the connector from the anchor. (Fig. 46-1b)

Snap onto anchors

Fig. 45-1

Fig. 45-2

Fig. 45-3

45