![](/images/new-backgrounds/1178149/17814985x1.webp)
7.0INSTALLATION
9.If you are using the Base, check that nothing is on top of the base, or anything that will interfere with the proper latching of the Safety Seat to the Base. Place the Safety Seat onto the Base and
push down until the Safety Seat latches |
|
securely to the Base and you hear a |
|
click. Pull upward on the Safety Seat to |
|
check that the Safety Seat is securely | Fig. |
latched onto the base. (Fig. |
If the Safety Seat does not securely latch onto the Base, the Safety Seat will NOT provide Protection for your child. DO NOT use the Safety Seat with the Base if it does not securely latch into place. Please call Baby Trend at
7.3 Installation of the Base using LATCH ![](/images/new-backgrounds/1178149/17814985xi2.webp)
Lower Anchors and Tethers for Children (LATCH) System is designed to make installation of child safety seats easier by requiring child safety seats to be installed without using the vehicle’s seat belt system. By September 1, 2002, two rear seating positions of all cars, mini vans and light trucks will come equipped with lower child safety seat anchor points located between a vehicle’s seat cushion and seat back. Also by September 1, 2002, all child safety seats will have two attachments which will connect to the vehicle’s lower anchor points. Together, the lower anchors and upper tethers make up the LATCH system.
43