Bahco manual BE-6990-IP6 IP15, BE-6990-IP20 IP25

BE-6990-IP

Fixed-Setting Torque Screwdrivers

for TORX® and TORX PLUS® head screws

Applications

Torque Screwdriver BE-6990-IP was specially developed for changing cutting plates on automatic cutting machines, in order to ensure consistent accurate cutting.

Incorrectly tightened screws produce an untidy cut surface and cause the cutting plates to wear out quickly. Excessively high tightening torque leads to rapid screw fracture.

Operation

Torque Screwdriver BE-6990-IP uses a built-in spring. It is preset to a fixed torque and cannot be recalibrated. The blades can be changed.

Finish of the blade

Blade made of VANADIUM EXTRA. Blade nickel- and chrome-plated, hardened over the entire length, tip black oxidized.

2-in-1 Set

with one TORX® and

one TORX PLUS® blade

Patent No.: US 6,487,943 B1 (USA), SE 513 457 (Sweden),

TW 143955 (Taiwan) Patent pending: Europe, Japan

Sliding T-handle

with locking mechanism

and one TORX® and

one TORX PLUS® blade

BE-6990-IP6 – IP15

Accuracy ±10% with a lifetime up to at least 20,000 applications.

Material

Ergonomically designed 2-component handle made of polyamide and thermoplastic elastomer.

BE-6990-IP20 – IP25

Accuracy ±6% with a lifetime up to at least 20,000 applications.

Material

3-component handle made of polyamide, ESD Nitrile Rubber, shore hardness

70 degrees and aluminium alloy with anodisied black finish.