Section 2 • General Boat Arrangement
Basic Boat Dimensions and Clearances (Metric)
Boat Dimensions and Clearances
(Fig. 2.3.1)
10.7m |
1.83m |
1.32m |
35 Outlaw Specifications | Height Dimensions |
Overall Length | 10.7 m |
Overall Length (w/ drive down) | 11.1 m |
w/std. Swim Platform | 11.3 m |
Beam (width) | 2.59 m |
Draft (stern drive down) | 102 cm |
Draft (stern drive up in trailering position) | 63.5 cm |
Dry Weight | 3,674.1 kg |
Fuel Capacity | 700.3 liters |
4.Propulsion System
Your boat is equipped with a stern drive type propulsion system also known as an inboard- outboard engine. (See Figure 2.2.2) This type of propulsion system has the engine inside the boat secured to the hull's stringers at the rear end of the hull. The stern drive unit, also called the lower unit because it hangs below the hull, is part of the propulsion system that attaches to the outside of the hull or transom. The stern drive unit pivots to steer the boat.
For engine operating instructions, see page 3.4.
From Keel |
|
|
without Windshield | 1.83 m | |
Keel To Top |
|
|
Of Windshield | 1.32 m | |
From Waterline |
|
|
without Windshield | 1.98 | m |
Waterline to Top |
|
|
of Windshield | 1.47 | m |
2.59 m
Beam
(FIG. 2.3.2)
5.Propellers
Your Baja®has been equipped with a propeller which our tests have shown to be the best suited for general use under normal conditions and load.
Under no circumstances use a propeller which allows the engine to operate at higher than the maximum RPM for your engine. (See the Engine Operator's Manual.)
35 Outlaw® | 2.3 |
