PROCON®
CANNED MOTOR PUMP 7000
Specification Sheet
Motor Voltage (Frequency) | 230/220 |
Capacitor | 20 μf |
Phase | Single |
Speed | 2880 @ 50 Hz |
Power | .5 HP Output Equivalent (375 Watt) |
Motor Insulation Class | B; IPX4 |
Flow Range @ 50 Hz | 46 to 440 lph |
Elastomers | Nitrile, EP, |
| Fluorocarbon, Neoprene |
Maximum Inlet Water Temperature * | 30°C |
Maximum Operating Pressure | 13.8 bar |
Maximum Relief Valve Pressure | 17.2 bar |
Maximum Inlet Pressure | 6.9 bar |
Burst Pressure | 68.9 bar |
Maximum Dry Suction Lift for Priming with Relief Valve ** | 2.00 m |
Maximum Ambient Air Temperature | 42°C |
For applications above 42°C consult the factory |
|
Minimum Ambient Air Temperature | 4°C |
For applications below 4°C consult the factory |
|
Minimum Inlet Water Temperature | 0°C Non frozen |
For applications below 0°C consult the factory |
|
Porting Configurations | 3/8” NPT, |
Wiring Configuration - Standard |
|
Male Plug Part # AMP
Cap Part # AMP
Pin Part # AMP
230 VOLT
GREEN / YELLOW (GROUND)
BLUE (NEUTRAL)
BROWN
Wiring Configuration - Alternate
220/230 VOLT | BROWN |
| BLUE (NEUTRAL) |
* Temperatures above 30°C have not been evaluated for ETL compliance | ** Not recommended for normal operation |
PROCON® Products
Acragar Road, Mountmellick, Co. Laois | Telephone: | Email: sales@standex.ie |
Republic of Ireland | Fax: | Telex: (852) 60019 |
