BALANCES.COM

MODEL 500KL

Thank you for your purchase of this product. Please read this manual carefully and keep it handy for ready reference. Merci d’avoir acheté ce produit. Veuillez lire attentivement ce manuel et le garder à portée de main pour pouvoir le consulter à tout moment

Gracias por la adquisición de este producto. Lea por favor este manual cuidadosamente y manténgalo a su alcance para una pronta referencia.

ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FRANCAIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ESPANOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

TABLE OF CONTENTS

CAUTION AND WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SCALE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

STORAGE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

OPERATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CAUTION AND WARNING

To prevent injury and damage to your scale, please follow these instructions very carefully

•Do not transport the scale while the platform is loaded.

•For accurate weighing the scale must be placed on a flat, stable surface.

•For accurate weighing, verify proper operation according to the procedure described in this manual before each use.

•Do not use in the presence of flammable materials.

•Operating at other voltages and frequencies than specified could damage the equipment.

•If the “LOW BAT” indicator activates, for accurate weighing replace the batteries or connect the scale to an AC power source as soon as possible.

•Only manufacturer’s qualified personnel shall service this scale.

This equipment has been tested and found to comply with the EMC limits for the Medical Device Directive 93/42/EEC (EN 55011 Class __ and EN 60601-1-2). These limits are designed to provide reasonable protection against harmful interference in a typical medical installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving device.

•Increase the separation between the equipment.

•Connect the equipment into an outlet on a circuit different from that to which the other device(s) is connected.

•Consult the manufacturer or field service technician for help.

DEFINITION OF SYMBOLS

+50C

Temperature range

 

AC to DC power supply

Attention, Consult Accompany Documents

 

-10C

 

12V DC, 100mA

 

Type BF Applied Parts

Humidity range

+

+ DC Connector Polarity

10%-95% RH

 

 

 

AC to DC power supply

Atmospheric pressure range

 

 

SCALE SPECIFICATIONS

1060hps

500hps

Capacity and resolution

500lb x 0.2lb / 220kg x 0.1kg

Power Requirements

Adapter Model ADPT31* 120VAC - 12VDC 60Hz 100mA or 6 - AA cell 1.5 V batteries

Environmental

Operating temperatures: 50ºF to 104ºF / 10°C to 50°C

 

Atmospheric Pressure: 500hPa - 1060hPa

 

Humidity: 10% - 95% RH

Platform Dimensions:

16 1/2" x 14" x 2 1/2" / 42.3 cm x 35.6 cm x 5.8 cm

Scale Dimensions

21" x 14 3/4" x 53 1/2" / 53.5 cm x 37.5cm x 136cm

 

 

STORAGE SPECIFICATIONS

Storage Temperatures:

32ºF to 122ºF / 0°C to 50°C

Humidity:

10% - 95% RH

Atmospheric Pressure:

500hPa - 1060hPa

 

 

*WARNING: For use with AC Adapter Model CSD1200100U-31/ADPT31 only.

Complies with C22.2 No. 601.1-M90 and UL Std No. 60601-1. Type BF applied parts. Internally powered. Equipment not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide.

2