Page 7
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Vision Sensors
Inspection
Remote TEACHInspection Inspection
Change
TEACH New
Condition
• The P4 GEO
inspects an ROI
for missing,
incorrect or
“smudged”
characters.
• When the date code changes, the GEO Count
tool must be taught the new pattern.
• Inspections taught via Remote TEACH are
saved in volatile memory. (If the sensor power
is cycled, the inspection must be re-taught.)
• Configure the
P4 GEO to inspect
for the new date
by toggling the
Remote Teach
input.
• The GEO inspects
the FOV for the
pattern of the new
date code.
NOTE: Remote TEACH changes the GEO Count tool reference pattern only; it does not change the exposure time, ROI, or sensor
settings. When Remote TEACH will be used to teach new patterns for future similar inspections, initial setup must be carefully
configured to accommodate all of the inspections.