Banner QS30H20 manual QS30H2O, World-Beam, Opposed-Mode Water Sensors, housing, in WORLD-BEAM

WORLD-BEAM®	QS30H2O	Reliable liquid detection
Opposed-Mode Water Sensors		in WORLD-BEAM®
		housing

High-power, infrared sensor for reliable detection of water and water-based liquids

The WORLD-BEAM®QS30H2O Sensor uses a 1450 nm sensing beam to burn through many types of thin-walled glass and plastic containers, creating contrast for reliable liquid detection. The QS30H2O Sensor is an innovative addition to Banner’s complete line of cost-effective, rugged and powerful WORLD-BEAM photoelectric sensors.

Liquid detection for challenging clear or translucent plastic or glass containers

Detect water and water-based liquids inside containers

▶Fluid filled IV bags

▶HDPE milk containers

▶Clear glass test tubes

▶Colored PET beverage bottles

▶Etched or frosted glass containers

▶Liquid point level in sight glass

▶Thin walled PFA/FEP tubes

▶Nozzle spray verification

Versatile models to meet demanding requirements

▶ Robust housing with

30 mm threaded barrel

and integrated side mount

▶ Receivers with a choice of outputs

and range

• Models with bipolar NPN/PNP output

and 2 m range

• High-gain models with bipolar

NPN/PNP output and 4 m range

• Analog (0-10V) output with 4 m range

▶Emits light that water-based liquids will attenuate, enhancing contrast in challenging low-contrast applications

▶Burns through many plastic and glass containers

▶Detects water-based liquids including liquor, beer, shampoos, conditioners, lotions and sauces

▶Penetrates many labels (material thickness and type dependent)

▶Features WORLD-BEAM QS30 housing with popular 30 mm threaded lens and side mount

▶Specified ranges of up to 4 m (longer range possible)

▶Offers built-in electronic crosstalk avoidance

▶Resists harsh environments with rugged IP67 (NEMA 6) housing and encapsulated electronics

▶Rated PW12 (1200 psi washdown)

▶Offers choice of 10 to 30V dc operation with bipolar, NPN (sinking) and PNP (soucing) output or 15 to 30V dc with analog (0-10V) output

▶Delivers highly visible power and output status indicators

▶Includes accessory apertures to attenuate or shape the beam

▶ Light operate (LO) or dark operate (DO),

depending on model (discrete only)

▶ Operating temperature from -20° to 60° C

▶ Large output status indicator on back

of receiver

▶ Bright LED status indicators on sensor top

▶ 2 m or 9 m attached cable or 5-pin Euro-style

pigtail quick-disconnect

www.bannerengineering.com

1.888.373.6767

bannerengineering.com