Baracoda BCM 2604 Code 2 of 5

3.7.1 Code 93 Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description

(chapt 3.2) for additional information. Minimum and Maximum lengths = 0-80. Minimum Default = 0,

Maximum Default = 80.

Maximum Messa

e Len

3.7.2 Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data received does not

display with the proper characters, it may be because the bar code being scanned was created

using a code page that is different from the one the host program is expecting. If this is the case,

scan the bar code below, select the code page with which the bar codes were created (see Code

Page Mapping of Printed Bar Codes on page A-6), and scan the value and the Save bar code from

the Programming Chart on the inside the back cover of this manual. The data characters should

then appear properly.

Code 93 Code Page

3.8

3.8.1 Code 2 of 5 Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description for

additional information. Minimum and Maximum lengths = 1-48. Minimum Default = 4, Maximum

Default = 48.

* On

Off

Code 2 of 5

Code 2 of 5

* Off