Baracoda BCM 2604

3.16.3 EAN/JAN-8 Addenda Required

When Addenda Required is set to on, the imager will only read EAN/JAN-8 bar codes that have

addenda. Default = Not Required.

3.16.4 EAN/JAN-8 Addenda Separator

When this feature is on, there is a space between the data from the bar code and the data from the

addenda. When turned off, there is no space. Default = On.

3.17 MSI

MSI

3.17.1 MSI Check Character

Different types of check characters are used with MSI bar codes. You can program the imager to

read MSI bar codes with Type 10 check characters.

Default = Validate Type 10, but Don’t Transmit. When Check Character is set to Validate and

Transmit, the imager will only read MSI bar codes printed with the specified type check character,

and will transmit this character at the end of the scanned data.

When Check Character is set to Validate, but Don’t Transmit, the unit will only read MSI bar codes

printed with the specified type check character, but will not transmit the check character with the

scanned data.

Validate Type 10 and Transmit

Off

* On