4. Getting Started
No. Key name Description
9*Aspectratio button. Opensthe selection menu for the aspect ratio.
10 FREEZE press to freeze the projected image.
11 TEXT todes-activa teo ractivate the on scree nslide bars.
12 ENTER toconfirm an adjustment or selectionin a menu..
Enteringthe adjustment mod e isalso possible.
13 Cursorkeys CursorKeys on RCU : to make item selections in a menu box or to adjust a fun ctionw hen a
slide bar is vissible.
14 EXIT toleave the selected menu box or item (go upwards to previous menu).
15 Audiocontrols not implemented
4.2 Switching on
Howtoswitchon
1. Press the main power switch on the projector
The projector goes to stand bymo de. The stand by LED blinks.
Start image projection
1. Press Standby key once on the RCU.
Note: Itmay take about 60 seconds before image projection, i.e. noprojection until the completion of several operations (soft-
ware initialization,...).
The projectorscans theinputs and displays the first found active source.
2. To switch to the desired source, press the corresponding digit on the RCU.
4.3 Lamp runtime
Lamp runtime indication while running
Whenthe total runtime of the lamp is 1400 hours or more, a warning message will be displayed : “LampRuntime : 1400 hours”.
When the total runtime of the lamp is 1500 hours or more, a second message will be displayed : “Lamp Runtime limit reached :
1500 hours”.
Thiswarning message will be repeated at next start up. Press EXIT to remove this message.
Contact a qualified service technician to replace the lamp.
Thetotal life time of the lamp for a safe operation is 1500 hours. Donotuse it longer as the lamp could explode .
Thelamp runtim e reset as well as the lamp replacement can only be done by a Barco authorized technician.
R5976763 CINEVERSUM 60/70 22042004 27