4. Getting Started
4.4 Switching from operational mode to standby
Howtoswitchtostandby
1. Press the standby button on the remote control for 2 secon ds.
A message : “Power down appears”.
Projectorgoes into standby. Sta ndby LED blinks. After a while, the fans stop blowing and the projector switch off automatically.
4.5 Switching off the projector
Howtoswitchtooff
1. Press the standby button on the remote control for 2 secon ds.
A message : Power down appears.
Projectorgoes into standby. Sta ndby LED blinks. After a while, the fans stop blowing and the projector switch off automatically.
2. Press the main power switch on the projector.
4.6 Temperature error DMD
Overview
Whenthe temperature of the DMD is too low or too high, the projector will switch automatically to standby. Th e LED on theprojector
flashes 8 times and an automatic shutdown is activated.
4.7 Using the RCU
Pointing to reflective screen
Point the front of the RCU to the reflective screen surface.
A
C
B
Image4-3
Viareflective screen
Direct pointing to the IR sensors
Pointthe RCU to any of the remote sensors, located on the front, top and the rear of the projector. Theremote control can be used
upto 9 meters from the projector and within a 45 degree angle with respect to the sensors.
28 R5976763 CINEVERSUM 60/70 22042004