4. Getting Started
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
ADJEXIT
ENTER
PAUSETEXT
?PHASE
SHARPN
BRIGHTN
C
O
NTR
BASS
TREB
LEBALANCE
TINT
COLOR
F1
F2F4
F5
F3
90
78
56
34
12
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
ADJEXIT
ENTER
PAUSETEXT
?
PHASE
SHARPN
BRIGHTN
CONTR
BASS
TREBLE
VOL
BALANCE
TINT
COLOR
F1
F2F4
F5
F3
90
78
56
34
12
45
45
Image4-4
Directusing of the RCU
Backlighting
Whena button is pressed on the RCU,backlight is activated automatically. That allows the user to operate the remote control in a
darkroom. Backlight is turned off automatically a few seconds after the last button is pressed.
4.8 Projector Address
Projector address
Address installed in the projector to be individually controlled.
Overview
The projector address can be set to any value between 0 and 9.
Why a projector address ?
Asmore than one projector or device which is remote co ntrolled can be installed in a room, the separate projector or device should
be separately addressable with an RCU.
When the projector and another device have the same address, during controlling, interference is possible. To avoid that, set the
projector address on a not used address inthe roo m.
How to set the projector address ?
1. Press The Address key (recessed key) with a pencil.
Theprojector displays a message box to an nounce thatyou c an enter an address between 0 and 9.
2. Enter the address by pressing a digit key between 0 and 9.
Theprojector address and the address of the RCUwill be changed to the newentered address.
3. Press EXIT to return to operational mode.
4.9 Controlling the projector
Input Selection
Keyin the corresponding input with the digit keys on the RC U. The selected source will be displayed.
When an source isdisplayed and more sources are connected andswitche d on:
•press↑key to display the previous source.
•press↓key to display the next source.
Whenno previous or next source, the projector returns to the actu alsource (o nly when Auto search is on).
R5976763 CINEVERSUM 60/70 22042004 29