3Connect the other end of the power cord to a grounded power outlet.
2.5.Routing the signal cables
After connecting all cables, fix them in the cable tie at the rear of the connector compartment. You can also bind the cables together by means of the 2 velcro strips included in the package.
After fixing the cables, put the connector compartment cover back in place. Pay attention that the signal cables are positioned under the bulge in the cover.
Next, fix the cables in the plastic clamps on the foot. At last, put the foot cover back in place.
To put the foot cover in place:
1Push the upper side of the cover onto the foot, so that the hooks on the cover are positioned right under the holes in the foot.
2Slide the cover upward while moving the lower side of the cover towards the foot.
3Press the cover to the foot so that both clips make a clicking sound.
Connector compartment
Push the upper side of the | Signal cables routed under foot |
cover onto the foot | cover and bound by velcro strips |
MFGD 3220D User's Guide | 13 |
