6. IMAGE CONTROL

6. IMAGE CONTROL

Image controls

The Brightness, Contrast, Sharpness (Detail), Colorand Tint functions are directly accessible with the Remote Control.
The adjustment functions, when selected, display a slide bar overlayed on the source image.
It is useful to adjust the Brightness, whenever the ambient room lightning changes. The same is true for
Contrast. Please note that for the best result, it is advised to first change the Brightness, then the Contrast.

6.1 Brightness Control

How to adjust the Brightness

The Brightness function is used to adjust the overall light output. To adjust the Brightness, press the (+) or (-) side of the button
’BRIGHT’(image 6-1.
The following barscale is overlayed on the source image,image 6-2.
Press the (+) button for a brightener image or the (-) button for a darker image.
If video or data is displayed with a black background, adjust until the background just appears (black becomes a very dark grey).
Image6-1
Image 6-2

6.2 Contrast Control

How to adjust the Contrast

The Contrast functionis used to adjust the contrast between the light and dark areas of the displayed image.
Toadjust Contrast, press the (+) or (-) side of the button ’CONTR’ (image 6-3). The following barscale is overlayed on the source
image, image 6-4.
Press the (+) or (-) button until dark parts of theimage show good detail.
If Contrast iss ettoo high, the image loses detail and clarity. If set too low, it may be difficult to distinguish between foreground and
background information.
R5976490 CINE VERSUM SYSTEM 17012003 23