3. OVERVIEW USER’s CONTROL S
Factory address setting of the modules
The factory address setting of the modules is as follows:
Module IndividualAddress Common Address
Cine VERSUM 80 address <9> no common address
Cine VERSUM 50 address <9> no common address
Cine VERSUM Master address <1> common address <0>
Common address: is a fixed address, stored in the module. The module will execute the commands sent by
a Remote Control, programmedwith the common add ress<0>.
3.5.2 Bat tery Insertion in the Remote Control
Where to find the batteries
The batteriesare not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life
time.
How to install the batteries
1. Push the cover tab (A) with the fingernaila little backwards and pull upwards the cover top (B). (image 3-6)
2. Slide the cover forwards to remove. (image 3-7)
3. Push the battery body towards the spring and liftit up to remove. (image 3-8)
4. Insert two AA size batteries, making sure the polaritiesmatch the + and – marks inside the battery compartment (image 3-8).
5. Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover until it clicks in place
(image 3-8).
Image3-6
Batterycover unlock
Image3-7
Batterycover removal
Image3-8
Batteryremoval
12 R5976490 CINE VERSUM S YSTEM 17012003