•Speaker impedance: 4 ohm
•System: Full range satellite
•Speaker drivers: 1 x 3" full range
•Dimensions (WxHxD): 87 x 161 x 95 mm
•Weight: 0.47 kg/each
Remote control batteries
•2 x
Laser
•Laser Type (Diode): InGaN/AIGaN (BD), AIGaInP (DVD/CD)
•Wave length: 405 +7
•Output power (Max. ratings): 20 mW
(BD), 6 mW (DVD), 7 mW (CD)
8 Troubleshooting
En g l is h
Warning
•• Risk of electric shock. Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself.
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support.
Main unit
The buttons on the home theater do not work.
•Disconnect the home theater from the power supply for a few minutes, then reconnect.
Picture
No picture.
•Make sure that the TV is switched to the correct source for the home theater.
No picture on a TV connected through HDMI.
•Make sure that you use a High Speed HDMI cable to connect the home theater and TV. Some Standard HDMI cables do not display properly for some images, 3D video, or Deep Color.
•Make sure that the HDMI cable is not faulty. If it is faulty, replace it with a new cable.
• Press (Home) and then 731 on the remote control to restore the default picture resolution.
•Change the HDMI video setting, or wait for 10 seconds for auto recovery (see 'Picture and video settings' on page 22).
EN 29