Note
•• Depending on the manufacturer,
•• Philips does not guarantee 100% interoperability with all
Before you start
•Connect your home theater to the HDMI- CEC compliant device through HDMI connection.
•Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.
Enable EasyLink
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [EasyLink] > [EasyLink] > [On] .
4 On your TV and other connected devices,
output through your home theater |
|
| |
speakers automatically when you play the | is h |
device. | |
• [Audio Input Mapping] (Audio input | En gl |
mapping):If system audio control does not |
|
work, map the connected device to the |
|
| |
correct audio input connector on your |
|
home theater (see 'Set up the audio' on |
|
page 11). |
|
Note
•• To change the EasyLink control settings, press (Home), select [Setup] > [EasyLink].
Set up the audio
If you cannot hear the audio output of a connected device through your home theater speakers, check that you have enabled Easylink on all the devices (see 'Enable EasyLink' on page 11).Then, set up the EasyLink audio control.
turn on
•On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.
EasyLink controls
With EasyLink, you can control your home theater,TV, and other connected
•[One Touch Play]
•[One Touch Standby]
•[System Audio Control] (System audio control): If system audio control is enabled, the audio of the connected device is
1
2
3
4
5
• To play the audio from the TV speakers, select [Off], and skip the following steps.
EN 11