7. Image Menu
5. Press →to pull down the menu
6. Use ↓or ↑to select Gamma
7. Press ENTER
On the screen appears now a sliderbox
8. Use ←or →, the numeric keys on the remote, or the keypad to change the Gamma

7.1.7 Phase

Phase adjustment

A bad phase adjustment will result in bad transitions and sometimes noise (text can end to be unclear).

How to change the Phase ?

1. Press MENU to activate the Toolbar
2. Press →to select the Image item
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select settings
5. Press →to pull down the menu
6. Use ↓or ↑to select Phase
7. Press ENTER
On the screen appears now a sliderbox (image 7-6)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the Phase
Image 7-6

7.1.8 Noise reduction

How to change the Noise reduction ?

1. Press MENU to activate the Toolbar
2. Press →to select the Image item
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select settings
5. Press →to pull down the menu
6. Use ↓or ↑to select Noise reduction
7. Press ENTER
On the screen appears now a sliderbox
8. Use ←or →, the numeric keys on the remote, or the keypad to change the Noise reduction setting.

7.2 Aspect ratio

Aspect ratios

The standard aspect ratio used in broadcast television is the 4:3 ratio. However, most of the DVD sources use nowadays the
widescreen 16:9 or even the cinemascope 2.35:1 aspect ratio.
Some DVD sources may even use the anamorphic 16:9 or anamorphic 2.35:1 to take advantage of the higher vertical resolution
offered by the 4:3 ratio. The “anamorphic” term means that the original widescreen image is squeezed in order to fit the 4:3 aspect
ratio.
60 R5976367 BARCOIQ GRAPHICS 500 01/02/2007