9. Service Mode
9.7.4 RS422 Termination
Set up
Thelast projector in a line should be RS422 terminated (ON position). Allothers in the line should be in the OFF position. Tochange
the termination position :
1. Push the cursor key ↑or ↓to highlight RS422 Termination. (menu 9-21)
The actual setting will be displayed.
2. Press ENTER to toggle between ON and OFF.
Default : ON
SERIAL COMMUNICATION
PROJECTOR ADDRESS 001
BAUDRATE [115200]
INTERFACE STANDARD [RS232]
RS422 TERMINATION [ON]
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-21
9.8 Network Configuration
DHCP
Dynamic host configuration protocol
What can be done?
Thenecessary network addresses (configuration) can be e ntered so that the projector can be connected to a LAN (local area net-
work).
Set up the network configuration.
Toset up the network configuration, follow the next procedure :
1. Push the cursor key ↑or ↓to highlight Network Configuration. (menu 9-22)
2. Press ENTER to display the network configuration menu. (menu 9-23)
3. Set DHCP on or off(contact your network responsiblefor the correct setting in your environment).
DHCPon DHCPserver assigned an IP address to the client (network projector).
DHCPoff theclient has to fill out the IP address, the subnet mask and the defa ultg ateway.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-22
NETWORK CONFIGURATION
DHCP [ON]
IP ADDRESS 158.150.160.200
SUBNET MASK 158.150.160.201
DEFAULT GATEWAY
158.150.300.300
MAC ADDRESS 01:01:02:DB:FF:89
APPLY
Select with ↑or ↓
<ENTER> to edit
Reprogram with ↑or ↓
or numeric keys
APPLY to confirm
<EXIT> to return
Menu9-23
108 R5976801 SLM R9+ 20/10/2004