3. Installation
3.1 Battery installation in the RCU

How to install the battery

Twobatteries are packed together with the RCU. Before using your RCU, install first these batteries.
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Insert the batteries as indicated in the RCU.
4. Put the battery cover on its place.

How to replace the batteries in the RCU

Toreplace the batteries :
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Push on the + side of the batte ry towards the - side
4. Lift up the battery at the same time.
5. Repeat for the second battery.
6. Insert the batteries as indicated in the RCU(batte ry type AA or LR6 or equivalent).
7. Put the battery cover on its place.
Image3-2
3.2 Lens installation

How to install ?

1. Take the lens out of its packing material
2. Fix the lens by placing it in the housing
8R59770079 BARCO ID H250/500 23/07/2007