4. Connections
4. CONNECTIONS
Overview
Power connection
Signal connections
Communication connections

4.1 Power connection

Power connection

1. Use the supplied power cord to connect the projector to the power outlet.
2. Plug the female power co nnectorinto the maleconnector at the fro nt of the projector.
Image4-1
Powerconnections

4.2 Signal connections

Overview
The input section
Connecting a Composite video signal
Connecting an S-Video signal
Connecting an RGB signal
Connecting a Component Video signal
Connecting a DVI signal
Connecting a computer signal
The DVI output

4.2.1 The input section

Input layers

The input section is located at the front of the projector and is composed of 3 layers which can be equipped with different input
modules depending on the ordered options .
The standard layers :
Layer 1: DVI Input/Output module:
Layer 2: RGBHV & Video analog input module
Layer 3: DVI & Computer (D15) input module
Layer 4 : Ethernet card
The different available options :
R59770079 BARCO ID H250/500 23/07/2007 15