5. Setup
A dialog box appears on the screen
Image5-6
6. Enter the new projector address withthe digit keys on the RCU, the local keypad or the cursor keys.

How to change the common address ?

1. Proceed in the same way as for the projector address
5.6 Setting up the orientation

What must be done ?

Dependingon the mechanical orientation of the projector, the projector’s internal settings have to be adapted.
The projector is shipped (default) with a table/front orientation.

How to set the orientation ?

1. Press MENU to activate the Tool bar
2. Press →to select the Installation item
3. Press ↓to Pull down the Installation menu
4. Use ↑or ↓to select Orientat ion
5. Press →to pull down the menu
6. Use ↓or ↑to select the desired orientation
Image5-7
7. Press ENTER
The projection is adapted and a bullet shows the active configuration.
5.7 Adjusting the lens

What must be done ?

Depending on the projection distance and the lens used, the image may not be at the desired size, position and/or may be out of
focus.
Theprojector will always allow you to shift your image vertically as we ll as horizontally (when available) to position it on the screen.
Inad dition, motorizedlenses will also allow you to Zoom and focus the image.
R59770079 BARCO ID H250/500 23/07/2007 31