B. Built-In Dust Filters
B
A
ImageB-11
Releasedust filter at front side
2. Loosen the 4 captive screws (B) securing filter casing to pro jector front.
Thedu st filteris released and ca n be removed (C) for cleaning or replacement.
C
ImageB-12
Removingdust filter from its casing
How to clean!
1. Put the dirty air filter far away from the projector or preferable in another room.
2. Brush most of the dust off with a soft brush and/or blow dust away with com presses air.
Tip: Always replace damaged and/or too dirty air filters by a new one.
How to reinstall the cleanedor new air filter
1. Slide the air filter (A) in its casing and hold it in place with one hand (B).
R5976654 SLMR12+ 27/01/2005 143