economizer failure alarm

Upon failure of either economizer to open on command or close on command, the Economizer Failure Alarm will open normally closed contacts to signal the failure. To utilize this feature, terminals 8 & 9 must be connected to the shelter alarm panel.

2-compressor run alarm

If both compressors are running at the same time, the 2-Compressor Run Alarm will open indicating this condition.

note: The alarm LED display board is shipped uninstalled to protect it from possible damage during installation of the wiring to main controller board and/ or the alarm board. It is polarity sensitive and is keyed so it can only be installed in correct position.

Note: The LED display board can be replaced if needed independently of the alarm board. Bard part number is 8612-022.

alarm led display board

MIS-2042

alarm wiring

Alarm relays can be wired for NO (close on alarm) or NC (open on alarm) strategy.

Alarm relays can be used individually if there are enough available building alarm points, or can be arranged into smaller groups or even a single group so that all alarm capabilities can be utilized.

When multiple alarms are grouped together and issued as a single alarm, there will no off-site indication of which specific problem may have occurred, only that one of the alarms in the group has been triggered. The individual alarm problem will be shown on the LED display on the face of the controller.

Note: All alarm and output relays are Form C (SPDT) dry contacts rated 1A @ 24 VAC.

Note: All alarm relay outputs have 10-second delay in acutally issuing to protect against nuisance alarm signals.

The Power Loss 1, Power Loss 2 and controller alarm relays are all “reverse actuated”, which means they are continuously energized (the NO contact is closed) and switched to NC position upon alarm condition. Therefore, it is important to closely follow the alarm board connection diagrams that follow.

Any alarm feature that is not desired can simply be ignored (not connected).

note: The LED display board is polarized and will only fit in one direction as shown. It must be fully inserted in order for the controller to function properly.

Manual

2100-571A

Page

24 of 31

Page 24
Image 24
Bard MV4000 installation instructions Economizer failure alarm, Compressor run alarm, Alarm wiring

MV4000 specifications

The Bard MV4000 is a groundbreaking mobile video platform designed to revolutionize the way organizations manage and distribute video content. This versatile device is particularly notable for its robust features, advanced technologies, and user-friendly characteristics, making it an indispensable tool for various industries, including education, security, and entertainment.

One of the standout features of the Bard MV4000 is its high-definition video capture capabilities. The platform supports 4K resolution, ensuring that every detail is captured with stunning clarity. This makes it an ideal solution for applications where image quality is paramount, such as live events or surveillance operations. The MV4000 is equipped with multiple camera inputs, allowing users to connect various types of cameras, including PTZ (pan-tilt-zoom) cameras for versatile shooting options.

Another significant advantage of the Bard MV4000 is its advanced streaming technology. The device supports a wide range of streaming protocols, including RTMP and HLS, facilitating seamless content delivery across different platforms. This flexibility ensures that users can easily broadcast live events over the internet or integrate the device into existing workflows without significant technical hurdles.

The MV4000 also features an intuitive user interface, making it accessible to users of all skill levels. The touchscreen controls simplify the setup and operation of the device, allowing video producers to focus on content creation rather than technical complexities. Additionally, the platform's built-in editing tools enable users to perform real-time adjustments, enhancing the overall production quality without the need for extensive post-production work.

In terms of connectivity, the Bard MV4000 excels with its multiple options, including Wi-Fi, Ethernet, and cellular connectivity. This versatility allows users to remain connected in various environments, from remote locations to urban settings. The device further supports various storage options, ensuring that users can save and access their video content with ease.

Finally, the Bard MV4000 is designed with durability in mind. Its rugged casing and robust construction make it suited for field use, ensuring it can withstand the rigors of outdoor applications. With its combination of high-definition video capabilities, advanced streaming technologies, user-friendly interface, versatile connectivity options, and durability, the Bard MV4000 stands out as a premier mobile video solution for today’s dynamic multimedia landscape.