Speaker Wiring Configuration
The BA3000.1D is a SINGLE CHANNEL dedicated subwoofer amplifier. Unlike other amplifiers, the BA3000.1D operates as a single channel and cannot be bridged. Don't be fooled by the outputs. Two outputs are used strictly for convenience and are parallelled internally on the amplifier. This means that if both outputs are used with one driver each, the amplifier sees the same load as if the two same drivers are connected to only one output terminal. In both diagrams, the amplifier sees a 2 Ohm load.
Wiring Diagram
In both diagrams, the amplifier sees a 2 ohm load.
GND | B+ | + | - | + | - |
|
| SPEAKER OUTPUT | |||
POWER |
|
|
|
|
|
4 ohms
B+ REM GND
ON
PROTECTION
POWER
4 ohms
GND | B+ | + | - | + | - |
|
| SPEAKER OUTPUT | |||
POWER |
|
|
|
|
|
4 ohms
Master / Slave Wiring Diagram
In this diagram, each amplifier sees a 2 ohm load.
B+ REM GND
ON
PROTECTION
POWER
4 ohms
GND | B+ | + - + - | B+ REM GND |
ON
PROTECTION
POWER
SPEAKER OUTPUT
POWER
4 ohms
GND | B+ | + | - | + | - | B+ | REM GND |
|
|
|
|
|
|
| ON |
|
|
|
|
|
|
| PROTECTION |
|
| SPEAKER OUTPUT |
|
| |||
POWER |
|
|
|
|
|
| POWER |
8
