BAUMATIC BDW13, BDW14 dishwasher user manual | 4 |
CONTROL PANEL
NOTE: YOUR DISHWASHER’S CONTROL PANEL IS ON THE TOP LIP OF THE DOOR. IF YOUR APPLIANCE IS BEING INSTALLED UNDER A WORKTOP, YOU WILL NEED TO OPEN THE DOOR TO SEE THE CONTROL PANEL.
1Program Indicator Light: when you select a washing program, the corresponding light will display.
2Program Key: Press to select a washing program. Multiple presses select different programs. See page 13 for how to program the washing cycle you want.
3Salt and Rinse Aid Warning Light: Comes on when the softener or rinse aid dispenser needs refilling. Note that when you first use your dishwasher, the salt & rinse aid lights do not go out immediately.
4Half Washing Light: Comes on when you select the ‘Half wash’ option.
5Half Washing Key: Press to select ‘Half wash’ program. *(Optional half washing means that the lower spray arm does not run, so you should load the upper basket only).
6Delay Start Time: Displays the delay start time, the water temperature & ERROR CODES (see p. 24).
7Delay Key: Press this key to set the delay start time. You can delay starting your washing cycle up to 24 hours. One press on this delays the start of the washing cycle by one hour.
8Power On light: Comes on when the ‘ON / OFF’ Button is pressed down.
9ON / OFF Button: Turns the power supply on and off.
NOTE: YOUR DISHWASHER CAN RUN A TEST CYCLE. THIS HAPPENS WHEN YOU PRESS EITHER THE PROGRAM KEY OR THE DELAY TIMER KEY BEFORE PRESSING THE ON / OFF BUTTON. WHEN THIS HAPPENS, YOUR DISHWASHER WILL NOT RUN BUT WILL ENTER THIS TEST CYCLE INSTEAD. PLEASE SEE PAGE 19 (TROUBLESHOOTING SECTION) FOR MORE INFORMATION AND HOW TO CORRECT IT.
DISHWASHER FEATURES
1ADJUSTABLE UPPER BASKET
2SPRAY ARMS
3LOWER BASKET
4WATER SOFTENER
5MAIN FILTER
6DETERGENT DISPENSER
7CUP & GLASS SHELF (ADJUSTABLE)
8CUTLERY BASKET
4
9COARSE FILTER
10RINSE AID DISPENSER
11DRAIN PIPE CONNECTOR
12 INLET PIPE CONNECTOR
