oThe aperture that your dishwasher needs to be installed into should resemble the one shown in the drawings on the previous page.

oThere should be less than a 5 mm gap between the top of the dishwasher and the underneath of the worktop. The height of the aperture required will vary between 820 – 870 mm depending on the height of the adjustable feet.

Installation stages

1.Preparing and connecting the furniture door.

2.Adjusting the tension of the door spring.

3.Connecting to the mains water supply

4.Connecting to the water outlet

5.Connecting to the power supply

6.Applying the condensation strip

7.Positioning the dishwasher

8.Levelling the dishwasher

9.Securing the dishwasher

Preparing and connecting the furniture door

o IMPORTANT: The furniture door is not supplied with the appliance. You should purchase one to match with the rest of your kitchen cabinets.

oThe maximum weight of the furniture door should be 5.5 kilograms. The maximum thickness of the furniture door should be 15 mm.

37

Page 37
Image 37
Baumatic BDWI660 manual Installation stages, Preparing and connecting the furniture door