Baumatic BDWS60SS manual Changing the wash program, At the end of a wash program

oSelect any program options that you want to use (e.g. delay start).

oClose the door firmly, so that you hear the door lock click shut.

oAfter a few seconds, you will hear the appliance begin to fill with water and the wash program will have started.

Changing the wash program

IMPORTANT: This should only be attempted when the cycle has only just started, otherwise the detergent tablet may have already released or you could have hot water escaping.

oSlightly open the door of the appliance.

oWait for a minute before fully opening the door to ensure the spray arms have stopped working, and to avoid scalding.

oPress and hold down the program selection button for 3 seconds to cancel the wash program. Then use the program selection button to choose the correct wash program.

oSelect any program options that you want to use (e.g. delay start).

oClose the door firmly, so that you hear the door lock click shut.

oAfter a few seconds, you will hear the appliance begin to fill with water and the wash program will have started.

At the end of a wash program

oA buzzer will sound for 8 seconds.

oUse the ON/OFF button to switch the dishwasher off.

oWe would advise waiting for at least a few minutes before unloading the dishwasher to avoid handling items which will still be very hot and more susceptible to breakage. Items will also dry better if they are left for longer in the dishwasher before unloading.

oOpen the door of the appliance and unload the dishwasher.

22